Component Inspection - APRILIA ATLANTIC 125 Workshop Manual

ATLANTIC 125 - 200
7.8.6.

COMPONENT INSPECTION

Read 1.2.1. carefully.
STANCHION TUBE
•
Inspect the sliding
scratching. Eliminate minor scoring with wet sand
paper (grain size 1).
•
Replace the stanchion if badly scored.
•
Check for stanchion buckling using a dial gauge.
•
Replace the stanchion if buckled beyond the service
limit.
Service limit: 0.2 mm.
DANGER
NEVER attempt
stanchion as this would weaken the overall
structure leading
condition.
SLIDER
•
Inspect for damage and/or cracking. Replace if
damaged.
•
Change any component which is badly worn or
damaged.
Renew the following components on assembly:
- top cap O-ring (1);
- oil seal (2);
- dust seal (3);
surface for scoring and/or
to straighten a buckled
to a dangerous riding
CHASSIS
7 - 75