APRILIA ATLANTIC 125 Workshop Manual page 193

ATLANTIC 125 - 200
7.9.2. REMOVING THE LINKAGES
TORQUE WRENCH SETTINGS
Nut (2)
Shock absorber bolt (4)
Nut (9)
•
Remove the air dam,
•
Remove both rear side panels,
•
Unhook the spring (1).
•
Fix the slings to the grab rail.
•
Lift the hoist arm until stretching the slings taut.
WARNING
You will need an assistant in order to perform
this procedure safely.
•
Release and remove the nut (2) working from the right
side.
•
Withdraw the engine bolt (3) from the left side and
collect the washer.
•
Release and remove the shock absorber lower bolt (4).
•
Release and remove the silent-block retaining bolt (5)
working from both sides.
40 Nm (4.0 kgm)
50 Nm (5.0 kgm)
60 Nm (6.0 kgm)
7.1.8.
7.1.3.
CHASSIS
7 - 79