Beam Horizontal Setting - APRILIA ATLANTIC 125 Workshop Manual

ATLANTIC 125 - 200
8.13.2.

BEAM HORIZONTAL SETTING

To adjust the horizontal position of the beam:
•
Open the glove compartment (1) and unhook the side
guides by pressing moderately downwards.
•
Use a screwdriver and rotate the upper adjuster
screws (2) of both beams:
TIGHTEN (turn clockwise) to move the beam to the right
(viewed in the direction of travel);
SLACKEN (turn anticlockwise) to move the beam to the left;
(viewed in the direction of travel).
ELECTRICAL SYSTEM
8 - 29