Xorcom XP0120 User Manual page 85

XP0120 Enterprise IP Phone
Hot Desking

ACD

Zero-sp-touch

URL

Switch
You can use the Switch key feature to use up to 38 programmable keys on the
Expansion Module. To use Switch key feature, you need to configure the switch key in
advance:
To configure the programmable key1 and key21 as switch key:
1) Click on DSS Keys->CM Keys.
2) Select Switch from the pull-down menu of the Type for key1.
3) Enter the label, for example, Page 1, in the Label field for key1.
4) Repeat the steps 2-3 to configure the key21 as switch feature key.
5) Click Confirm to accept the change.
After configurations above, you can press the switch key1 to turn to the next page on
the Expansion Module, and then use the last 19 programmable keys. You can also then
press the switch key21 to turn back to use the previous 19 programmable keys.
For more information about configuring the keys, refer to DSS Keys Configuration.
Xorcom Ltd.
Using the XP0020 Expansion Module
71 www.xorcom.com