Zero-Sp-Touch; Url; Snmp - Xorcom XP0120 User Manual

XP0120 Enterprise IP Phone
Key again to enter to the ACD Status page, then select the phone status as Available/
Unavailable). If the phone is set to Available, then the server begins to distribute
calls to this phone.
Note:
ACD feature is not available on all servers. Contact your system administrator for
more information.

Zero-sp-touch

You can also press the DSS key which set as the Zero-sp-touch. Then press the DSS key,
the phone will turn to the Zero-sp-touch interface.
To assign the key as Zero-sp-touch via web user interface:
1) Click on DSS Keys->Memory Keys.
2) Select the desired DSS key.
3) Select Zero-sp-touch from the pull-down list of Type.
4) Click Confirm to save the change

URL

If the key is configured as URL, then pressing this key, you can send HTTP requests to
a web server.
To assign the key as URL via web user interface:
1) Click on DSS Keys->Memory Keys.
2) Select the desired DSS key.
3) Select URL from the pull-down list of Type.
4) Enter the number you want to set as URL in the Value field.
5) Click Confirm to save the change.

SNMP

Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices in IP networks. It is used mostly in network management systems to
monitor network-attached devices for conditions that warrant administrative attention.
SNMP exposes management data in the form of variables on the managed systems,
which describe the system configuration. These variables can then be queried (and
sometimes set) by managing applications. For further information, you can refer to
http://en.wikipedia.org/wiki/SNMP.
By default, the phone does not accept SNMP requests. This is necessary because SNMP
might introduce unwanted security threats. The phone only supports the GET request of
SNMP. SET or other requests are not supported. To enable SNMP, you must specify what
Xorcom Ltd.
Using the Advanced Phone Functions
62 www.xorcom.com