Table of Contents
Advertisement
XP0120 Enterprise IP Phone
The phone supports only SNMP v2c. Basic GET requests can be run in order to retrieve
information from an SNMP-capable device. For example:
>snmpget v2c –c public 192.168.3.10 1.3.6.1.2.1.37459.2.1.5.0
Action URL
Action URLs are HTTP GET Requests allowing the phone to interact with web server
applications. To use this feature, you should specify a HTTP URL corresponding to the
predefined event. In case the predefined event has taken place, a HTTP GET to the
specified URL is performed.
HTTP GET requests may contain variable names and variable values, which are
separated by "=". Each variable value starts with $ in the query part of the URL (e.g.
http://192.168.10.1/help.xml? MAC=$mac).
Action URLs can be triggered only by predefined events (e.g. Log on).
To configure Action URL via web user interface:
1) Click on Phone->Action URL.
2) Enter a HTTP URL in the proper field.
3) Click Confirm to save the change.
Note:
Action URL is allowed to be HTTPS URL. Contact with your system administrator
for more information.
The following table provides variables can be used in the Action URL:
Parameter
$mac
$ip
$model
$firmware
$active_url
$active_user
$active_host
$local
$remote
$display_local
$display_remote
$call_id
$duration
$callDirection
Xorcom Ltd.
Using the Advanced Phone Functions
Descriptions
MAC Address of the phone
IP Address of the phone
Device model name of the phone
Firmware version of the phone
SIP URI of the active user
User part of the SIP URI of the active user
Host part of the SIP URI of the active user
SIP URI of the caller
SIP URI of the callee
Display name of the caller
Display name of the callee
Call id
Call duration
Indication of the call as sender or recipient
64
www.xorcom.com
Advertisement
Table of Contents
