Tls; Dns-Srv; Network Setting; Pc Port Setting - Xorcom XP0120 User Manual

XP0120 Enterprise IP Phone

TLS

TLS(Transport Layer Security), an IETF standards track protocol(RFC 5246), was based
on the earlier SSL specifications developed by Netscape Corporation.
If you make a call based on TLS and SRTP (Set the transport as TLS and the SRTP as
On), the IP phone UI will display the connecting and ring back interface. If the reception
also set the transport as TLS, then IP phone UI will display the icon
To configure TLS via web user interface:
1) Click on Account->Basic.
2) Select the desired account from the pull-down list of Account.
3) Select TLS from the pull-down list of Transport.
4) Click Confirm to save the change.

DNS-SRV

If the SIP server cannot be used, the phone will be connected on the server which is
available.
To configure DNS-SRV via web user interface:
1) Click on Account->Basic
2) Select DNS-SRV from the pull-down list of Transport.
3) Click Confirm to save the change.

Network Setting

PC Port Setting

Refer to Configuration and Registration for the basic network WAN setting
information. The following table lists the instructions of the field about the network PC
port setting.
Field Name
As Bridge
As Router
IP address
DHCP Server
Xorcom Ltd.
If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
If you select the Router mode, the SIP phone will work as a router
User could configure the PC port IP address.
If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the DHCP
server cannot work.
Using the Advanced Phone Functions
Description
40
on both sides.
www.xorcom.com