Bluetooth Name For Your Openstage - Siemens OpenStage 60 SIP Operating Manual

Step by Step
User
Configuration
Bluetooth
Configuration
Phone name
Save & exit

Bluetooth name for your OpenStage

Here you can determine which name your OpenStage
should use to register at other Bluetooth devices.
z You can also configure this setting via the Web interface
page 230.
By factory default, the Bluetooth name is:
OpenStage [MAC address of your telephone].
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown. The Bluetooth
settings dialog is selected.
Select and confirm the option shown.
j
Specify and confirm the required name.
Select and confirm the option shown.
Individual phone configuration
205