Set The Sensitivity Of The Touchguide - Siemens OpenStage 60 SIP Operating Manual

Step by Step
User
Phone
Display
TouchGuide setting
Save & exit

Set the sensitivity of the TouchGuide

Adjust the sensitivity of the TouchGuide
choosing one of the four settings available.
z You can also configure this setting via the Web interface
page 230.
v
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Confirm the option shown.
W
By sliding
or
ac
Pressing, you can choose one of four levels for the sen-
sitivity.
i
Confirm the option shown.
Select and confirm the option shown.
Individual phone configuration
page 22 by
183