Table of Contents
Advertisement
Step by Step
User
Configuration
Outgoing calls
Immediate dialing
Yes
Save & exit
Immediate dialing
Immediate dialing should only be activated if service
personnel has configured and approved a dial plan.
Immediate dialing is deactivated by default. For this rea-
son after entering the number you must either confirm
the "Dial" option or wait until the dial delay expires to set
up the connection. If Immediate dialing is configured,
your call is automatically dialed as soon as the string en-
tered matches an entry in the dial plan.
Activating or deactivating immediate dialing
z You can also configure this setting via the web interface
page 230.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context me-
nu.
Select and confirm the option shown.
Dialing using the hot or warm line function
Your service personnel can configure a hot or warm line
for your phone.
If you lift the handset of the phone or press the
loudspeaker key
•
with a hot line immediately or
•
with a warm line after a defined period of time,
a number specified by service personnel is dialed.
Examples:
•
The phone in the lift immediately dials the reception
number.
•
The phone at a patient's bed dials the ward number
e.g. after a minute if no other number is dialed.
Basic functions
63
Advertisement
Table of Contents
