Siemens OpenStage 60 SIP Operating Manual page 106

Enhanced phone functions
Step by Step
Outgoing calls
Autodial delay
Save & exit
User
Configuration
Outgoing calls
Busy when dialing
Yes
Save & exit
106
Select and confirm the option shown.
Select and confirm the option shown.
j
Specify a value and confirm your entry.
Select and confirm the option shown.
Automatic dial delay does not work if you are
using a dial plan and Immediate dialing is confi-
gured (see
cally dialed as soon as the string entered mat-
ches an entry in the dial plan.
Allowing "Busy When Dialling"
If you activate this function, an incoming call received
while you are performing dialing is rejected. The caller
then hears the busy signal.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
This setup option can also be found under "Han-
dling" in the "Incoming calls" menu.
page 63). The number is automati-