Memory/Class - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 45 Sunday, February 12, 2006 10:53 PM
D
Press the {Start} key.

Memory/Class

The Memory/Class function is useful
especially for people such as teachers,
who often have to make different
numbers of prints from the same orig-
inal for different classes or have to
make the same number of prints from
a number of different originals for the
same class.
Under the Memory/Class function,
the following modes are available:
❖ Class Mode (print per class)
Use to make prints from one origi-
nal for multiple classes, with the
same number of prints for each
class.
R
R
R
❖ Memory Mode (print per original)
You can choose from the following
two types of Memory mode:
• Normal Memory Mode
ANT128S
• Stack Memory Mode
R R
R R
GRCLAS0E
Printing Functions
Use to make prints from a num-
ber of different originals. A dif-
ferent number of prints is made
from each original.
A
A
B
C
C
D
Use to make prints from one
original, with a different num-
ber of prints for each class.
A A A A A
Note
❒ You can specify either Normal
Memory Mode or Stack Mem-
ory Mode as the default. See
"Memory Mode Setting" on
p.107 "5 Mode Settings".
B
3
D
GRCLAS1E
STKMEM1E
45