Table of Contents
Advertisement
User Tools ( System Settings )
User Code
Register user codes to restrict copier
functions to certain users, and check
on their use of copier functions:
Registering a New User Code
A
Press the {User Tools/Counter} key.
3
B
Select [System Settings] using {U} or
{T}, and then press the {OK} key.
C
Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D
Select [Program/Change User Code]
using {U} or {T}, and then press
the {OK} key.
30
Downloaded from ManualsPrinter.com Manuals
E
Select [Program] using {U} or {T},
and then press the {OK} key.
F
Enter the user code using the
number keys, and then press the
{OK} or {#} key.
The "
Programmed
ARK004S
pears, and then the " User Code "
display returns.
G
Press the {User Tools/Counter} key.
Changing a User Code
Note
❒ Even if you change a user code, the
counter value will not be cleared.
A
Press the {User Tools/Counter} key.
B
Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C
Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D
Select [Program/Change User Code]
using {U} or {T}, and then press
the {OK} key.
E
Select [Change] using {U} or {T},
and then press the {OK} key.
" message ap-
Advertisement
Table of Contents
