Auto Sp Lp Timer; Auto Timer; Next Function Memory - JVC HR-S9600EK Instructions Manual

Auto SP LP Timer

If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode to allow complete recording.
For Example . . .
Recording a programme of 210 minutes in length onto a 180-
minute tape
Approximately 150 minutes
SP mode
Total 210 minutes
Make sure you set "AUTO SP LP TIMER" to "ON" at the Mode
Set screen before the timer-recording starts.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Press %fi to move the highlight bar (pointer) to "MODE
SET", then press OK or
SELECT MODE
3
Press %fi to move the
highlight bar (pointer) to
"AUTO SP LP TIMER",
#
then press OK or
"ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
The Auto SP LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
If you have programmed the recorder to timer-record 2 or more
programmes, the second programme and those thereafter may
not fit on the tape if you set "AUTO SP LP TIMER" to "ON". In
this case, make sure the mode is not engaged, then set the tape
speed manually during timer programming.
In order to ensure that the recording fits on the tape, this
feature may leave a short non-recorded section at the end of
the tape.
There may be some picture noise and sound disturbance at
the point on the tape where the recorder switches from SP to
LP mode.
If you perform timer recording with both PDC and the Auto
SP LP Timer activated, and the programme goes beyond its
originally scheduled length, there may be times when the
programme cannot be recorded in its entirety.
Approximately 60 minutes
LP mode
#
.
MODE SET
B. E. S. T.
PICTURE CONTROL
to select

AUTO TIMER

O. S. D.
DIRECT REC
AUTO SP=LP TIMER
DIGITAL 3R
NEXT PAGE
[5∞] =
[MENU] : EXIT
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Press %fi to move the
highlight bar (pointer) to
"MODE SET", then press
OK or
SELECT MODE
3
Press %fi to move the
highlight bar (pointer) to
"AUTO TIMER", then press
OK or
"ON" or "OFF".
ON
AUTO
OFF
ON
ON
RETURN TO NORMAL
ON
ON
SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press

Next Function Memory

The Next Function Memory "tells" the recorder what to do
after rewinding. Before continuing, make sure the recorder
is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press
seconds.
MODE SET
AUTO CH SET
#
.
MANUAL CH SET
INITIAL SET
REC LEVEL CTL
R.A. EDIT
[5 ∞ ] =
[MENU] : EXIT
B. E. S. T.
PICTURE CONTROL
#
to select either AUTO TIMER
O. S. D.
DIRECT REC
AUTO SP=LP TIMER
DIGITAL 3R
NEXT PAGE
[5∞] =
[MENU] : EXIT
‰ (or ‰ TIMER).
within 2 seconds.
‰ (or ‰ TIMER) within 2
49
MAIN MENU
MODE SET
ON
AUTO
ON
ON
ON
OFF
ON