Looking For The Scene You Want - JVC HR-S9600EK Instructions Manual

Looking For
The Scene
You Want
2
1
4
7
1
2
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, "REVIEW" and "3"
appear and blink. The REVIEW indicator on the
recorder also blinks. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
NOTES:
Instant ReView is not possible while the recorder is in the
Timer mode.
The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
( pg. 30).
REVIEW
2 3
30 SEC
5 6
8 9
3
4
0
4
3
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. Additional index
codes can be added manually
during playback. (See Below.) This
function gives you quick access to
any one of 9 index codes in either
direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
@ #
Press or (™ or £). "™ 1" or "£ 1" is
displayed on screen and search begins in the corre-
sponding direction.
To access index codes 2 through 9, press
repeatedly until the correct index number is dis-
played.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
A
–2
When the specified index code is located, playback
begins automatically.
Manual Index Mark/Erase
To mark an index code...
...during playback press INDEX MARK on the recorder.
The recorder will mark an index code at that location.
If "O.S.D." is set to "ON" (
screen while an index code is being marked.
To erase an index code...
...during playback or still press INDEX ERASE on the recorder.
The recorder will fast-forward to the nearest index code and
erase it. Playback continues after the index code is erased.
If "O.S.D." is set to "ON" (
screen while an index code is being erased.
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search, press PLAY.
@
or
@
twice.
#
once.
Current position
B C D E F
–1 1 2 3
Index number
pg. 47), "MARK" blinks on the
pg. 47), "ERASE" blinks on the
25
£ 2
#