Power Save Mode; Auto Sp A Lp Timer - JVC HR-S6955EK Instructions Manual

Power Save Mode

You can reduce the power consumption while the VCR is turned off.
get to the mode set screen Press m. Move the highlight
bar to using the A and B buttons and press
MODE SET
(or E).
select power save mode Move the highlight bar to
using the A and B buttons. Press
SAVE
select or .
ON OFF
return to normal screen Press m.
NOTES:
• During Power Save, the display panel will be turned off.
• The Just Clock function (
• While the VCR is in the Power Save mode, the picture may be distorted momentarily when
you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR's power is turned off after timer-recording (or Instant Timer Recording).

Auto SP a LP Timer

When timer recording in
the complete programme, it will automatically switch from
get to the mode set screen Press m. Move the highlight
bar to using the A and B buttons and press
MODE SET
(or E).
enable/disable auto spalp timer Select
using the A and B buttons and press
TIMER
E) to toggle between
return to normal screen Press m.
pg. 53) does not work while the Power Save mode is engaged.
mode, if the VCR calculates that there isn't enough tape to record
SP
and .
ON OFF
advanced features
POWER
(or E) to
to mode.
SP LP
AUTO SPaLP
(or
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
AUTO SP a LP TIMER OFF
F
POWER SAVE OFF
VIDEO STABILIZER OFF
NEXT PAGE
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
F AUTO SP a LP TIMER OFF
POWER SAVE OFF
VIDEO STABILIZER OFF
NEXT PAGE
[1] a k
[MENU]: EXIT
43