S-Video Connection - JVC HR-S9600EK Instructions Manual

Back of TV
Aerial connector
Mains outlet
Back of Recorder

S-VIDEO CONNECTION

To connect to a TV with S-VIDEO/AUDIO IN connectors . . .
1– Connect the aerial, recorder and TV as per "RF CONNEC-
TION" ( pg. 6).
2– Connect the recorder's S OUT connector to the TV's S-
VIDEO IN connector.
3– Connect the recorder's AUDIO OUT connectors to the TV's
AUDIO IN connectors.
ATTENTION
Do NOT Plug the mains power cord into a mains outlet until all connections are completed.
Do NOT press the
power before you start the Auto Set Up procedure described on page 8.
AUDIO IN connectors
S-VIDEO IN connector
Mains Power Cord
button on the recorder or on the remote control to turn on the recorder's
S-Video cable (provided)
Audio cable
(not provided)
AV1 OUT
S OUT
AV1 IN/OUT
COMP. Y/C
AV2 IN/DECODER
RF Cable (provided)
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
AFTER YOU FINISH THIS STEP
SYNCHRO EDIT
JLIP
ANT. IN
L
AUDIO
OUT
R
PAUSE/R.A. EDIT
RF OUT
pg. 51)
Go to Step 3 – AUTO SET UP
7