Auto Sp Lp Timer; Auto Timer - JVC HR-S9500EH Instructions Manual

Auto SP LP Timer

If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode to allow complete recording.
For Example . . .
Recording a programme of 210 minutes in length onto a 180-
minute tape
Approximately 150 minutes
SP mode
Total 210 minutes
Make sure you set "AUTO SP LP TIMER" to "ON" at the Mode
Set screen before the timer-recording starts.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Press %fi to move the highlight bar (pointer) to "MODE
SET", then press OK or
SELECT MODE
3
Press %fi to move the highlight bar (pointer) to "AUTO
SP LP TIMER", then press OK or
HR-S9500E
MODE SET

AUTO TIMER

O. S. D.
B. E. S. T.
AUTO SP=LP TIMER
DIGITAL 3R
POWER SAVE
S-VHS
NEXT PAGE
[5∞] =
[MENU] : EXIT
RETURN TO NORMAL SCREEN
4
Press MENU.
NOTES:
If you have programmed the recorder to timer-record 2 or
more programmes, the second programme and those
thereafter may not fit on the tape if you set "AUTO SP LP
TIMER" to "ON". In this case, make sure the mode is not
engaged, then set the tape speed manually during timer
programming.
In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
There may be some noise and sound disturbance at the point
on the tape where the recorder switches from SP to LP mode.
The Auto SP LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
If you perform timer recording with both VPS/PDC and the
Auto SP LP Timer activated, and the programme goes
beyond its originally scheduled length, there may be times
when the programme cannot be recorded in its entirety.
Approximately 60 minutes
LP mode
.
to select "ON".
HR-S9500EH
MODE SET
OFF AUTO TIMER
ON O. S. D.
ON B. E. S. T.
ON AUTO SP=LP TIMER
ON DIGITAL 3R
OFF S-VHS
AUTO EDIT
NEXT PAGE
[5∞] =
[MENU] : EXIT
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Press %fi to move the
highlight bar (pointer) to
"MODE SET", then press
OK or
SELECT MODE
3
Press OK or
AUTO TIMER
O. S. D.
B. E. S. T.
AUTO SP=LP TIMER
DIGITAL 3R
POWER SAVE
S-VHS
NEXT PAGE
[5∞] =
OFF
[MENU] : EXIT
ON
ON
ON
RETURN TO NORMAL SCREEN
ON
AUTO
4
Press MENU.
OFF
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press ‰ .
MODE SET
AUTO CH SET
.
MANUAL CH SET
INITIAL SET
REC LEVEL CTL
R.A. EDIT
[5 ∞ ] =
[MENU] : EXIT
to select either "ON" or "OFF".
HR-S9500E
MODE SET
ON AUTO TIMER
ON O. S. D.
ON B. E. S. T.
OFF AUTO SP=LP TIMER
ON DIGITAL 3R
OFF S-VHS
AUTO EDIT
NEXT PAGE
[5∞] =
[MENU] : EXIT
31
EN
MAIN MENU
HR-S9500EH
MODE SET
ON
ON
ON
OFF
ON
AUTO
OFF