Delete A Channel - JVC HR-S9600EK Instructions Manual

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on
page 56 to access the Confirmation screen before continuing.
SELECT ITEM
1 @ #
Press %fi
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Change Station Preset
Position
Perform steps 1 and 2 of "Storing Channels Manually" on
page 56 to access the Confirmation screen before continuing.
SELECT ITEM
1 @ #
Press %fi
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
@ #
Press %fi
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
PR CH ID PR
01 26 BBC1 08
02 23 ITV 09
03 30 CH4 10
04 33 BBC2 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9,
*
–, , +, (space) (maximum of 4).
CH ID
PR CH ID PR
–––– 01 26 BBC1 08
––––
02 33 BBC2 09
––––
03 23 ITV 10
––––
04 30 CH4 11
––––
05 37 CH5 12
––––
06 –––– 13
––––
07 –––– 14
[ 5 ∞ ] : MOVE =
[MENU] : EXIT
Fine-Tuning Channels
Already Stored
Perform steps 1 and 2 of "Storing Channels Manually" on
page 56 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press %fi
blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press
the picture is clearest. Then press OK.
The Confirmation screen appears.
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
ATTENTION
If channel positions are changed or deleted, the Guide
Program numbers that have been set are reset.
Example 1: If a channel is deleted, all the Guide Program
Example 2: If a channel is changed from position 4 to
Example 3: If a channel is changed from position 4 to
CH ID
––––
* In Examples 2 and 3, if the channel is moved to position
––––
10 before OK is pressed, the Guide Program numbers
––––
–––– above position 10 are reset.
––––
If an attempt is made at timer programming with VIDEO
––––
Plus+ in this state, the "GUIDE PROG SET" screen
––––
appears; set the Guide Program numbers on this screen.
"ATTENTION – Regarding Guide Program Number
Set" on pg. 17.
Or perform "Guide Program Number Set" (
@ #
until the channel you want to tune begins
#
until "+/–" begins blinking, then press %fi until
numbers are reset.
position 2, the Guide Program numbers
above position 4 are reset.
position 6, the Guide Program numbers
above position 6 are reset.
57
pg. 62).