Edit To Or From Another Video; Recorder - JVC HR-S9600EK Instructions Manual

38
Edit To Or
From Another
Video

Recorder

1
2
1
4
7
NUMBER "0"
1
2
– –:– –
2 3
5 6
8 9
3
4
0
4
3
TV PROG
ADVANCED OPERATIONS (cont.)
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 39.
A When Using Your Video Recorder As The Source
Player ...
... connect its AV1 IN/OUT connector to the
recording deck.
B When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
C If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder 's AV1 IN/OUT connector to
another recorder.
With C connection ...
When using your recorder as the recording deck, set
"AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to
"AV2" ( pg. 40).
When using your recorder as the source player, set
the AV1 OUT switch on the rear panel to Y/C
( pg. 6).
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select "L-1" for the AV1 IN/
OUT connector, or "L-2" for the AV2 IN/DECODER
connector, depending on the connector being used.
When using the AV2 IN/DECODER connector, set
"AV2 SELECT" to the appropriate mode. (
SET EDIT MODE
3
See "Picture Control" on page 35.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
pg. 40)