Power Save Mode; Auto Sp A Lp Timer - JVC HR-S6855EK Instructions Manual

56
advanced features

Power Save Mode

You can reduce the power consumption while the VCR is turned off.
get to the mode set screen
bar to
MODE SET
O (or E).
select power save mode
using the A and B buttons. Press O (or E) to
SAVE
select ON
return to normal screen
NOTES:
• During Power Save, the display panel will be turned off.
• The Just Clock function (
• While the VCR is in the Power Save mode, the picture may be distorted momentarily when
you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR's power is turned off after timer-recording (or Instant Timer Recording).
... the Auto Satellite Prog Recording mode is engaged (
...
L-2 SELECT

Auto SP a LP Timer

When timer recording in
the complete programme, it will automatically switch from
get to the mode set screen
bar to
MODE SET
O(or E).
enable/disable auto spalp timer
to
AUTO SPaLP TIMER
O (or E) to select
return to normal screen
using the A and B buttons and press
Move the highlight bar to
or OFF .
Press m.
pg. 66) does not work while the Power Save mode is engaged.
is set to
DECODER
mode, if the VCR calculates that there isn't enough tape to record
SP
using the A and B buttons and press
using the A and B buttons. Press
ON or OFF
Press m.
Press m. Move the highlight
POWER
or ( pg. 51).
SAT
Press m. Move the highlight
Move the highlight bar
.
PREVIOUS PAGE
F POWER SAVE
VIDEO STABILIZER
S-VHS
[1] a k
[MENU]: EXIT
pg. 48).
to mode.
SP LP
MODE SET
B.E.S.T.
PICTURE CONTROL
AUTO TIMER
O.S.D.
PROG. NAVIGATION
DIRECT REC
F AUTO SP a LP TIMER
NEXT PAGE
[1] a k
[MENU]: EXIT
ON
OFF
ON
ON
AUTO
OFF
ON
ON
ON
OFF