Random Assemble Editing - JVC HR-S9600EK Instructions Manual

42
Random As-
semble Editing
Player
Audio signal
Another recorder
(w/PAUSE connector)
Recorder
1 3
2
1
PROG
2
PAUSE/
R.A. EDIT
Your recorder
Video signal
Mini-plug Cable
REMOTE
PAUSE
(Not provided)
4
0
4
3
OK
ADVANCED OPERATIONS (cont.)
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or "cuts" for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. (
MAKE CONNECTIONS
1
Connect your recorder's AV1 IN/OUT or S OUT/
AUDIO OUT connectors to the VIDEO IN and AUDIO
IN connectors on the recording deck, and connect your
recorder's PAUSE/R.A. EDIT connector to the PAUSE
connector on the recording deck.
If the recording deck doesn't have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
SET EDIT MODE
4
See "Picture Control" on page 35.
START SOURCE PLAYBACK
5
Press PLAY.
ACCESS R.A. EDIT SCREEN
6
8
Press R.A. EDIT.
OR
Press MENU to access MAIN MENU screen and press
%fi to move the highlight bar (pointer) to "R.A. EDIT",
then press OK.
The screen is superimposed on the video playback in
step 7.
pg. 43)