Auto Sp Lp Timer; Auto Timer - JVC HR-J456EN Instruction Manual

Auto SP LP Timer

If there is not enough tape to record the entire program in SP
mode, the VCR automatically switches to LP (with PAL-N) or EP
(with NTSC) mode to allow complete recording.
For Example . . .
Recording a program of 210 minutes in length onto a 180-
minute tape
Approximately 150 minutes
SP mode
Total 210 minutes
Make sure you select "ON" at the Auto SP LP Timer screen
before performing timer programming.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH 5 ∞ (+/–) or PUSH JOG % fi , then press
OK or PUSH JOG # .
SELECT AUTO SP LP
TIMER SET MODE
3
HR-J456EN
FUNCTION

AUTO TIMER

SUPERIMPOSE
=AUTO SP = LP TIMER
B.E.S.T.
VIDEO SYSTEM
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "AUTO SP LP
TIMER" by pressing CH 5 ∞ (+/–) or PUSH JOG % fi,
then press OK or PUSH JOG # to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If you have programmed the VCR to timer-record 2 or more
programs, the second program and those thereafter may not
fit on the tape if you set the Auto SP LP Timer mode to
"ON". In this case, make sure the mode is not engaged, then
set the tape speed manually during timer programming.
In order to ensure that the recording fits on the tape, this feature
may leave a slight non-recorded section at the end of the tape.
There may be some noise at the point on the tape where the
VCR switches from SP to LP (or EP) mode.
The Auto SP LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will work with the
following tapes: T-30, T-60, T-90, and T-120.
Approximately 60 minutes
LP (EP) mode
HR-J656EN
FUNCTION
OFF AUTO TIMER
ON SUPERIMPOSE
= AUTO SP = LP TIMER
ON
ON 2ND AUDIO RECORD
AUTO AUDIO MONITOR
B.E.S.T.
VIDEO SYSTEM
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Auto Timer
When the Auto Timer is set to ON the timer is automatically
engaged when the VCR's power is turned off. It is automatically
disengaged when the VCR is powered back on.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH 5 ∞ (+/–) or PUSH JOG % fi, then press
OK or PUSH JOG #.
SELECT AUTO TIMER SET
MODE
3
=AUTO TIMER
SUPERIMPOSE
AUTO SP = LP TIMER
B.E.S.T.
VIDEO SYSTEM
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Move the highlight bar (arrow) to "AUTO TIMER" by
pressing CH 5 ∞ (+/–) or PUSH JOG % fi , then press
OK or PUSH JOG # to set to "ON" or "OFF".
OFF
ON
RETURN TO NORMAL
ON
OFF
SCREEN
HI-FI
ON
AUTO
4
Press MENU.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other VCR
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
HR-J456EN
FUNCTION
=AUTO TIMER
OFF
ON SUPERIMPOSE
AUTO SP = LP TIMER
OFF
ON 2ND AUDIO RECORD
AUTO AUDIO MONITOR
B.E.S.T.
VIDEO SYSTEM
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
31
EN
HR-J656EN
FUNCTION
OFF
ON
OFF
OFF
HI-FI
ON
AUTO