Information On J Terminal - JVC HR-S9600EK Instructions Manual

46
Information
On J Terminal
1
2
1
4
NUMBER
7
1
MENU
2
J terminal
– –:– –
2 3
5 6
8 9
3
4
0
4
3
OK
ADVANCED OPERATIONS (cont.)
J Terminal (JLIP(Joint Level
Interface Protocol) Connector)
The J Terminal is used to connect the recorder to a personal
computer or similar device to allow computerized control of the
recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:
Enables Random Assemble Editing of up to 99 segments,
using this recorder as the playback unit.
Allows you to capture still images from the recorder into a
personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must
be unique when your recorder is connected to another device
via its J terminal. The ID Number is preset to "1" at the factory.
You can change this number to any number between "1" and
"99". If it is necessary to change the JLIP ID number perform the
following steps.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS INITIAL SET SCREEN
2
Press % fi to move the highlight bar (pointer) to
"INITIAL SET", then press OK or
ACCESS JLIP ID NO. SET SCREEN
3
Press %fi and move the
highlight bar (pointer) to
"JLIP ID NO. SET", then
#
press OK or .
SET JLIP ID NUMBER
4
Press NUMBER keys to
enter the desired ID
number.
RETURN TO NORMAL SCREEN
5
Press OK.
#
.
INTIAL SET
CLOCK SET
GUIDE PROG SET
JLIP ID NO. SET
[5 ∞ ] =
[MENU] : EXIT
JLIP ID NO. SET
1
CLOCK SET
[0-9] =
[MENU] : EXIT