Specific Cli Commands Used With The Smn - Silicon Graphics UV 2000 System User's Manual

1: Operation Procedures

Specific CLI Commands Used With the SMN

16
The system will take time to fully power up (depending on size and options).
The following list of available CLI commands are specifically for the SMN:
authenticate SSN/APPWT change
auth
perform bios actions
bios
access BMC shell
bmc
access CMC shell
cmc
show system configuration
config
console access system consoles
list available commands
help
access hardware error logs
hel
access hardware configuration variable
hwcfg
display system LED values
leds
display system controller logs
log
access power control/status
power
Type '<cmd> --help' for help on individual commands.
007-5832-002