Chapter 5; Award Bios Utility; Entering Setup - AXIOMTEK SHB210 Series User Manual

Intel core 2 duo/ core duo core solo/ celeron m picmg 1.3 half-size single board computer
Hide thumbs Also See for SHB210 Series:
Table of Contents

Advertisement

SHB210 Socket M Half-Size SBC User's Manual
C h a p t e r 5

Award BIOS Utility

The Phoenix-Award BIOS provides users with a built-in Setup program
to modify basic system configuration. All configured parameters are
stored in a battery-backed-up RAM (CMOS RAM) to save the Setup
information whenever the power is turned off.
5.1

Entering Setup

There are two ways to enter the Setup program. You may either turn
ON the computer and press <Del> immediately, or press the <Del>
and/or <Ctrl>, <Alt>, and <Esc> keys simultaneously when the
following message appears at the bottom of the screen during POST
(Power on Self Test).
TO ENTER SETUP PRESS DEL KEY
If the message disappears before you respond and you still want to
enter Setup, please restart the system to try it again. Turning the
system power OFF and ON, pressing the "RESET" button on the
system case or simultaneously pressing <Ctrl>, <Alt>, and <Del> keys
can restart the system. If you do not press keys at the right time and
the system doesn't boot, an error message will pop out to prompt you
the following information:
PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP
Award BIOS Utility
27

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SHB210 Series and is the answer not in the manual?

Table of Contents