AXIOMTEK SHB210 Series User Manual page 41

NOTE: This function is only available with DOS and other
operating systems that do not trap INT13.
CPU L1 & L2 Cache
These two options speed up memory access. However, it depends
on the CPU/chipset design. The default setting is "Enabled". CPUs
without built-in internal cache will not provide the "CPU Internal
Cache" item on the menu.
Enabled
Disabled
Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is "Enabled".
Enabled
Disabled
First/Second/Third Boot Device
These items let you select the 1
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
Boot Other Device
This item allows users to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is "Enabled".
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or
80 tracks. The 360Kb type is 40 tracks while 720Kb, 1.2MB and
1.44MB are all 80 tracks. The default value is "Enabled".
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS can not
Enabled
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
BIOS will not search for the type of floppy disk drive by
Disabled track number. There will be no warning message
displayed if the installed drive is 360K.
Award BIOS Utility
SHB210 Socket M Half-Size SBC User's Manual
Enable cache
Disable cache
Enable Quick POST
Normal POST
st nd
, 2 , and 3
rd
devices that the
35