Table of Contents
Advertisement
OnChip IDE Device
Scroll to this item and press <Enter> to view the sub menu OnChip
IDE Device.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands,
or multiple sector read/write. If your IDE hard drive supports
block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block
read/writes per sector the drive can support.
IDE DMA transfer access
Automatic data transfer between system memory and IDE
device with minimum CPU intervention. This improves data
throughput and frees CPU to perform other tasks.
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE
interface with support for two IDE channels. Select Enabled
to activate each channel separately. The default value is
"Enabled".
NOTE: Choosing Disabled for these options will
Award BIOS Utility
SHB210 Socket M Half-Size SBC User's Manual
39
Advertisement
Table of Contents
Need help?
Do you have a question about the SHB210 Series and is the answer not in the manual?