Copying from the Multi Bypass Tray (Tray 7)
The multi bypass tray (Tray 7) can be used the same way as other trays. Also,
thick paper of larger than A4 (8
Note
You cannot use the label paper in the multi bypass tray (Tray 7).
The sizes of paper you can use with the multi bypass tray (Tray 7) are as fol-
lows.
Metric version
Inch version
The machine can automatically detect the following sizes as standard size
copy paper.
Metric version
Inch version
The maximum number of sheets you can load into the bypass tray depends
on paper type. The number should not exceed the upper limit.
If you want to use a size of paper other than those in the above table, be sure
to specify the size. See p.29 "When copying onto regular size paper".
A
Set the side fences (A A A A ) to the paper size.
1
B
Place paper in the multi bypass tray (Tray 7).
" × 11") size is available.
1
/
2
• Vertical: 139 – 305 mm
• Horizontal: 139 – 458 mm
• Vertical: 5.5" – 12.0"
• Horizontal: 5.5" – 18"
A3L, B4L, A4LK, B5K, A5KL, 11" × 17"L, 11" × 8
"L, 8" × 13"L
1
8
/
2
A3L, B4L, A4K, B5K, A5L, 11" × 17"L, 8
"LK, 8" × 13"L
1
8
/
2
1
2
ZJAY040N
Copying from the Multi Bypass Tray (Tray 7)
1
" × 11"LK, 5
1
/
2
2
" ×
1
/
"K, 5
/
2
2
" ×
1
/
2
27