Toshiba e-studio 900 Operator's Manual page 141

User Tools (Copier/Document Server Features)
Panel Features Default
You can specify the other tab function that is selected automatically just after
the machine is turned on or when modes are cleared.
Image Adjustment Priority
You can select the function that is priority detected in Image Adjustment
mode.
Tone: Original Remains
The beeper (key tone) sounds when you forget to remove originals from the
exposure glass after copying.
Note
If the "Panel Tone" in User Tools (System Settings) is "Off", the beeper
does not sound irrespective of the "Tone: Original Remains" setting. See
4
"Panel Tone", General Settings Guide.
Job End Call
You can select to have the beeper sound when copying is complete.
Note
If the "Panel Tone" in User Tools (System Settings) is "On", the machine
beeps to notify you if it did not complete a job, for reasons such as: copying
was interrupted, the paper tray ran out of paper or a paper jam occurred.
Customize Function: Copy
You can register frequently used functions for copying in function keys. You
can also change registered functions.
Customize Function: Store Document Server
You can register frequently used functions for storing data in the Document
Server in function keys. You can also change registered functions.
Customize Function: Print Document Server
You can register frequently used functions for printing data stored in the
Document Server in function keys. You can also change registered functions.
Special Original Display Defaults
You can have special originals shown on the initial display.
130