Toshiba e-studio 900 Operator's Manual page 129

Copy reference multifunctional digital systems
Hide thumbs Also See for e-studio 900:
Table of Contents

Advertisement

Troubleshooting
Problem
In Margin Adjustment
mode, parts of the original
image are not copied.
In Image Repeat mode, the
original image is not cop-
3
ied repeatedly.
Combine
Problem
You cannot make a book
from Booklet or Magazine
mode by folding copies.
When using Combine,
parts of the image are not
copied.
Copies are not in correct or-
der.
118
Causes
You set a wide erased mar-
gin.
There is a lack of margin
space on the opposite side
of the binding position.
You selected copy paper
the same size as the origi-
nals, or you did not select
the proper reproduction
ratio.
Causes
You selected a setting
("Open to left"or "Open to
right") that does not match
the orientation of originals.
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
You placed the originals in
the incorrect order.
Solutions
Set a narrower margin with User
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.131
"Front Page Margin : Left/Right",
p.132 "Front Side Margin : Top/Bot-
tom", p.131 "Back Side Margins :
Left/Right", and p.132 "Back Side
Margin : Top/Bottom".
Select copy paper larger than the
originals.
Select the proper reproduction ratio.
Solutions
Change the setting.
When you specify a reproduction
ratio using Manual Paper Select
mode, make sure that the ratio
matches your originals and the copy
paper.
Note
Select the correct reproduction
ratio before using Combine
mode.
When placing a stack of originals in
the ADF, the last page should be on
the bottom.
If you are placing originals on the
exposure glass, start with the first
page to be copied.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 1050

Table of Contents