Bypass Copying - Toshiba 3560 Operator's Manual

5. BYPASS COPYING

Bypass copying is convenient when the size of any paper cassettes installed in the copier is not
the size you require or when you want to use special types of paper such as OHP film
(transparency).
Copying Procedure
1 1 1 1 1
Place the originals on the document
feeder (optional) or on the glass.
G Set the original face down on the glass or
face up on the document feeder.
G For setting originals, refer to page 22/28.
2 2 2 2 2
Open the bypass guide.
G For setting A3, B4 or A4-R sized paper,
pull out the paper holder.
G Pulling out the paper holder – First,
pull it out halfway, then while pulling it in
the direction of arrow 1, turn it fully in the
direction of arrow 2.
34
Original
scale
1
Original
Paper holder
2