Directional Size Magnification (Inch) - Toshiba e-studio 900 Operator's Manual

B Adjust the horizontal ratio using [n
Note
Pressing [n n ] or [o
n n
holding down [n
If you have entered a ratio incorrectly, readjust using [n
C Adjust the vertical ratio using [n
C
Place originals, and then press the { { { { Start} } } } key.

Directional Size Magnification (inch)

Optimal reproduction ratios are automatically selected when you enter the re-
quired horizontal and vertical lengths of the original and copy image.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Note
Specify the vertical and horizontal sizes of the original and those of the copy,
as shown in the illustration.
You can enter sizes within the following ranges.
Metric version
Inch version
A
Press [Reduce/Enlarge].
B
Press [Dir. Size Mag."].
o ] changes the ratio in 1% increments. Pressing and
o o
n ] or [o o ] changes it in 10% increments.
n n o o
n ] or [o
n
n
Vertical: 1 – 999 mm (in 1 mm increments)
Horizontal: 1 – 999 mm (in 1 mm increments)
Vertical: 0.1" – 99.9" (in 0.1" increments)
Horizontal: 0.1" – 99.9" (in 0.1" increments)
n ] or [o
n n o ]. o o
o ]. o
o
Copy Functions
n ] or [o
n o ]. o
n o
2
41