Toshiba e-studio 900 Operator's Manual page 87

Copying
Outside
This mode blanks out all areas of the copy image except the area you specify.
2
Reference
The erase width in the [Border], [Center], and [Center/Border] modes is set to
10 mm (0.4") by default. You can change this settings with the User Tools.
See p.132 "Erase Border Width".
Note
The relation between the original orientation and the erased part is as follows:
L original
1. Erased part
2. 2 – 99 mm (0.1" – 3.9")
Border Erase
A
Press [Edit].
B
Press [Erase Border].
C
Set an erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width using [n
Note
To change the value entered, press [n
76
K original
2
1
n ] and [o
n n
1
o ]. o o
n ] and [o o ] to set the new value.
n o
n o
2