Toshiba e-studio 900 Operator's Manual page 91

Copying
Outside erase
Decide where the machine starts (X1, Y1) and stops erasing (X2, Y2).
Note
You can input lengths of 0 – 432 mm (0 – 17 inch).
A
Press [Edit].
2
B
Press [Erase Area].
C
Press [Erase Outside].
D
Enter the value of [X1] using the number keys, and then press [#] or the { { { { #} } } }
key.
E
Enter the value of [Y1] using the number keys, and then press [#] or the { { { { #} } } }
key.
F
Enter the value of [X2] using the number keys, and then press [#] or the { { { { #} } } }
key.
G
Enter the value of [Y2] using the number keys, and then press [#] or the { { { { #} } } }
key.
H
Press [2-sided Setting] and [Original (Back)].
Note
If you do not need to erase the image on the back of originals, proceed to
step K.
I
Enter the values of [X1], [Y1], [X2], and [Y2] for the back.
Note
Erasing the image on the back of originals is valid when you copy two-sid-
ed originals.
J
Press [OK].
K
Place originals, and then press the { { { { Start} } } } key.
80