Accessing User Tools (Copier/Document Server Features); Exiting User Tools - Toshiba e-studio 900 Operator's Manual

Accessing User Tools (Copier/Document
Server Features)
This section is for key operators in charge of this machine. You can change defaults.
Note
Settings with the user tools are completely different function from the ordi-
nary copier function. Be sure to return to the copier function when you finish
the settings.
Selected keys are highlighted.
Any changes you make with User Tools remain in effect even if the main
power switch or operation switch is turned off, or the { { { { Clear Modes} } } } key is
pressed.
Reference
For details about system settings, see "User Tools", General Settings Guide.
A
Press the { { { { User Tools} } } } key.
Note
When the access code is set, the access code input screen is displayed when
changing the initial settings. Enter the registered access code. For details
about the access code, see "Key Operator Tools", General Settings Guide.
B
Press [Copier/Document Server Features].
C
Select the item you want to set.
Setting screens for the selected item is displayed.
Reference
p.121 "User Tools Menu (Copier/Document Server Features)"
D
Change the settings by following the instructions on the display panel, and
then press [OK].

Exiting User Tools

A
After changing User Tools settings, press [Exit] on the User Tools main menu.
User Tool changes are complete, and the machine is ready to copy.
Note
You can also exit User Tools by pressing the { { { { User Tools} } } } key.

Accessing User Tools (Copier/Document Server Features)

ZJBS050N
4
125