Default Settings; Save User Settings As Defaults; Restore User Defaults; Restore System Defaults - CipherLab 1564 User Manual

1564 Barcode Scanner

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS

For the scanner to keep the customized settings as user defaults, you must have it read
the "Save as User Defaults" barcode. This is a normal setup barcode, and the scanner will
respond with two beeps (low-high tone).
After reading the "Update" barcode, the current settings will be saved as user
defaults.

RESTORE USER DEFAULTS

For the scanner to restore the user defaults, which you have saved earlier, you must
have it read the "Restore User Defaults" barcode. This is a normal setup barcode, and the
scanner will respond with two beeps (low-high tone).
After reading the "Update" barcode, all the parameters of the scanner will return to
their customized values.

RESTORE SYSTEM DEFAULTS

For the scanner to restore the factory defaults, you must have it read the "Restore
System Defaults" barcode. This is a normal setup barcode, and the scanner will respond
with two beeps (low-high tone). For 3656 to restore factory defaults, refer to
Barcodes & Serial Commands.
After reading the "Update" barcode, all the parameters of the scanner will return to
their default values. The current connection record will be cleared as well.
Note: The system default value (if there is) for each setting is indicated by an asterisk
"*".
14
User Guide
Save as User
Defaults
Restore User
Defaults
Restore System
Defaults
Enter Setup
3656 Setup