CipherLab 1564 User Manual page 206

1564 Barcode Scanner
5A (Z) N/A
5B ( [ ) GS1 DataBar (RSS)
3) Barcode Length setting – read the
4-digit length of the (first) barcode. For example, read "0065" for barcode length of
65 characters or read "0000" for any length.
Note: If not reading 0000 for any length, the 4-digit length must exclude prefix, suffix
(0x0d by default), length code, etc.
4) Matching Character setting – read the
st
the 1 character that must be found matching in the (first) barcode. For example,
read "4" and "1" for matching character "A" as the first character in the barcode or
read "00" for any character.
5) Read twice the "F" barcode on page 252 ("FF") to complete the setting of each
barcode.
6) Read the "Validate" barcode to end the editing of the barcode set.
194
User Guide
79 (y)
7A (z)
7B ({)
7C (|)
7D (})
7E (~)
"Decimal Value" barcode on page 251 for the
"Hexadecimal Value" barcode on page 252 for
Chinese 25
Aztec
Micro QR
USPS 4CB / One Code /
Intelligent Mail
UPU FICS Postal
UCC Coupon Extended Code
Enter Setup