Addon Security For Upc/Ean Barcodes - CipherLab 1564 User Manual

1.10 ADDON SECURITY FOR UPC/EAN BARCODES

The scanner is capable of decoding a mix of UPC/EAN barcodes with and without addons.
The read redundancy (2~30 times) allows changing the number of times to decode a
UPC/EAN barcode before transmission. The more redundancy you select, the higher the
reading security is, and thus, the slower the reading speed becomes. You will have to
compromise between reading security and decoding speed.
Note: UPC/EAN Addon 2 and Addon 5 must be enabled individually for this setting to
take effect.
1) Read the barcode above to specify the read redundancy for UPC/EAN barcodes. (It is
set to 2 by default.)
2) Read the "Decimal
scanner to re-read the barcode for 12 times.
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 251. For example, read "1" and "2" for the
Chapter 1 Understanding the Barcode Scanner
Addon Security Level
(*2~30)
Update
45