Light Kit - Kipor SINEMASTER IG1000 Operation Manual

12. LIGHT KIT

MOUNTING INSTRUCTIONS FOR: IG1000s LIGHT KIT
Our IG1000S Light kit is designed specifically for use on the IG1000 Generator.
Tools required: Phillips Screwdriver
Parts list:
(1) IG1000 Portable Digital Generator
(2) IG1000s-05100 Light Kit Assembly
(3) IG1000s-05001 Antiskid Round Nut
(4) IG1000s-05001 Antiskid Round Stud
(5) IG1000s-05003 Left Mounting Plate of Light Kit
(6) IG1000s-05004 Right Mounting Plate of Light Kit
(7) Screw M5×45
(8) Screw M5×16
Installation Instructions
(1) Remove the screw from the IG1000 Portable Digital Generator and the screws from the side of
the control plate;
(2) Disperse the mount plate of the Light, use screw M5×45 and screw M5×16 then locate the
mounting plate of Light Kit on generator. DO NOT TIGHTEN SCREWS.
(3) Use the antiskid round stud through the Light 、left and right mount plate in turn, then lock the
antiskid round stud.
(4) After adjusting the turnover angular of Light, tighten the antiskid round stud, screw M5×45 and
screw M5×16 in turn.
Before energizing the light, be sure to read the Generator Owner's Manual for best operation and
maintenance information along with the safety precautions. It is recommended that the light switch
be in the OFF position when starting the generator.
2PCS
1PCS
39