Kipor SINEMASTER IG1000 Operation Manual page 24

Smart throttle
Engine speed is kept at idle automatically when the electrical load is disconnected and returns to
the proper speed to match the power of the electrical load when the load is reconnected. This
position is recommended to minimize fuel consumption while in operation.
■ Smart throttle system does not operate effectively if the electrical appliance requires rapid
cycling power.
■ When high electrical loads are connected simultaneously, turn the Smart throttle switch to the
OFF position to reduce voltage fluctuation or shutdown.
■ In DC operation, turn the Smart throttle switch to the OFF position.
OFF:
Smart throttle system does not operate. Engine speed varies with the load.
24