Table of Contents
Advertisement
NeoGate TA FXS Gateway Quick Installation Guide
3.2.3 Power Connection
Connect the power adapter to the Gateway's power port, and then plug the power adapter into an electrical
outlet. Press the On switch to power on the Gateway. The gateway will start booting. In the meantime, users
would see that the "POWER" and "RUN" indicator lights turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.4 Connection Diagram
Figure 3-1 NeoGate TA800 Connection Diagram
Figure 3-2 NeoGate TA3200 Connection Diagram
http://www.yeastar.com
9/12
Advertisement
Table of Contents
