Specifications And Operating Environment - Yeastar Technology NeoGate TA FXS Quick Installation Manual

LED Indication
POWER Power status
RUN NeoGate status
1-32 FXS Ports Status
Ports
Ethernet Port
Reset Button
Power Inlet
RJ11 FXS Ports
RJ21 FXS Ports
RS232 Console Port
(TA1600/2400/3200)

2.3 Specifications and Operating Environment

TA400/800
Size (L×W×H)
Power Supply
Operating Temperature
Storage Temperature
Humidity
Table 2-3 NeoGate TA400/800 Specifications and Operating Environment
TA1600/2400/3200
Size (L×W×H)
Power Supply
Operating Temperature
Storage Temperature
Humidity
Table 2-4 NeoGate TA1600/2400/3200 Specifications and Operating Environment
http://www.yeastar.com
NeoGate TA FXS Gateway Quick Installation Guide
Status
On
Off
Blinking
Not Blinking/Off
Green light
Table 2-1 LED Indications
NeoGate provides 1 10/100 adaptive RJ45 Ethernet ports, marked as LAN.
-LAN port: LAN port is for the connection to Local Area Network (LAN).
Press the reset button to restore the factory defaults.
Please make sure that you want to reset, because once reset the previous
configurations would be erased automatically.
For connection of power supply.
For connection of analog phones/fax machines.
For connection of analog phones/fax machines with an RJ21 to RJ11 cable.
For debugging.
Table 2-2 Ports Descriptions
200 mm × 137 mm × 25.6 mm
12V 1.5A
0 to 50°C, 32 to 122°F
~
-20 65°C, 4
10%~90% Non-condensing)
(
440 mm × 250 mm × 44 mm
AC 100-240V 50/60Hz
0 to 50°C, 32 to 122°F
-20 to 65°C, 4 to 149°F
10% to 90%
Description
The power is switched on.
The power is switched off.
NeoGate is running properly.
NeoGate goes wrong.
Solid green: the port is idle.
Green light blinking: there is an ongoing call on the port.
Description
Description
~
149°F
Description
non-condensing)
(
7/12