Table of Contents
Advertisement
TB200/400 Installation Guide
3.2.3 Power Connection
Connect the power adapter to the Gateway's power port, and then plug the power
adapter into an electrical outlet. Press the On switch to power on the Gateway. The
gatewaywill start booting. In the meantime, users would see that the "POWER"
and "RUN" indicator lights turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.4 Connection Diagram
Figure 3-1 TB200/400 Connection Diagram (Front Panel)
Figure 3-2 TB200/400 Connection Diagram (Rear Panel)
8/11
Advertisement
Table of Contents
