Table of Contents
Advertisement
[1]
An appliance should never be left unattended when plugged in. Unplug from outlet when not in use.
[2]
Close supervision is necessary when this unit is used by or near children or disabled persons.
[3]
Use this elliptical only for its intended use as described in this manual.
[4]
Never operate this elliptical if it has a damaged cord or plug, if it is not working properly, or if it has been damaged.
Call your selling dealer immediately for examination and repair.
[5]
Keep the power cord away from heated surfaces. Be sure the line cord has plenty of slack and does not get pinched
underneath the elliptical.
[6]
Never drop or insert any object into any opening. Be sure no objects are near or underneath the elliptical.
[7]
Do not use outdoors.
[8]
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
[9]
Connect this appliance to a properly grounded dedicated outlet only.
[10] To disconnect, press the OFF button, and unplug the unit from the wall outlet.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for
electric current to reduce risk of electric shock. This product is equipped with a cord having an equipment grounding
conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
110-250 (50/60HZ) ELLIPTICALS
This elliptical is configured to operate between 110-250 (50/60hz) circuits. The internal transformer will automatically
adjust to any circuit configuration within these parameters. The line cord supplied with ellipticals marked 120 VAC are
intended for use in a nominal 120-volt circuit with a grounding plug. Make sure the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this product.
Ellipticals marked 200-250 VAC are intended for use on a circuit having a nominal rating more than 120V and are factory
equipped with a specific cord and plug to permit connection to a proper electric circuit. Make sure the product is connected
to an outlet having the same configuration as the plug. No adapter should be used with this product. If the product must be
reconnected for use on a different type of electric circuit, qualified service personnel should make the reconnection.
DANGER: Improper connection of the equipment-grounding connector can result in a risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify
the plug provided with the product. If it will not fit in the outlet, have a proper outlet installed by a qualified electrician.
ii
Important Safety Instructions
WARNING: To reduce the risk of electric shock or injury to persons:
Advertisement
Table of Contents
