Ricoh B230 Service Manual page 604

Hide thumbs Also See for B230:

Table of Contents

Initializes the CCS (Certification and Charge-control Service) settings.

SRM Memory Clr

Initializes the SRM (System Resource Manager) settings.

Initializes the LCS (Log Count Service) settings.

Initializes the WebUapl settings.

Performs a free run on the copier engine.

001 TRAY1: A4LEF: FC

002 TRAY2: A3: FC

003 TRAY2: A4SEF: FC

[Input Check]

[Output Check]

Resets a type A service call condition.

The machine starts free run in the same condition as the sequence

of A4/LT, A3 or A4 SEF printing from the 1st or 2nd tray. Therefore,

the correct paper should be loaded in the 1st tray or 2nd tray, but

paper is not fed.

The main switch has to be turned off and on after using the free run

mode for a test.

See "Input Check" in this section.

See "Output Check" in this section.

Chapters

Table of Contents