Ardf - Ricoh B230 Service Manual

stations.
2. Check the leading edge and side-to-side registration. Adjust the following SP
modes if necessary. Standard: 0 ± 2mm for the leading edge registration, 0 ±
2.5mm for the side-to-side registration.
Leading Edge Registration
Side-to-Side Registration

3.3.2 ARDF

ARDF side-to-side, leading edge registration and trailing edge
A: Leading edge registration
Use A3/DLT paper to make a temporary test chart as shown above.
1. Put the temporary test chart on the ARDF. Then make a copy from one of the
feed stations.
2. Check the registration. Check the leading edge and side-to-side registration.
Adjust the following SP modes if necessary. Standard: 4.2 ± 2 mm for the leading
edge registration, 2 ± 1 mm for the side-to-side registration. Use the following SP
modes to adjust if necessary.
SP Code
SP6-006-001
SP6-006-003
B230/B237
What It Does
Side-to-Side Registration
Leading Edge Registration
SP mode
SP4-010-001
SP4-011-001
3-4
Adjustment Range
± 3.0 mm
± 5.0 mm
SM