G3 Interface Unit (B787)
For Single G3 Board and Double G3 Boards
1.
Reinstall the fax unit to the controller board (see step 5,
If the fax unit has not been installed, attaching the mother board to the
mother board bracket is necessary. For details, refer to the "FAX OPTION
TYPE MPC3000 (B786) INSTALLATION PROCEDURE".
2.
Attach the controller box cover [A] to the controller box (see step 3 and 4,
12).
3.
Attach the rear cover to the copier (
4.
Attach the ferrite core [B] to the telephone cord [C].
5.
Connect the telephone cord [C] to the "LINE 2" jack.
Connect the one more telephone cord to the "LINE 3" jack if you have
installed two G3 boards. Make sure that each telephone (LINE2 and LINE3)
B786
x7).
12
x 4).
x
SM