Ricoh B230 Service Manual page 312

No. Type
Finisher error
The machine does not recognize the finisher, but recognizes the bridge
unit.
792 B
1.
2.
No. Type
Front jogger motor error
793 B
1.
2.
3.
4.
5.
B230/B237
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Defective connector
Defective harness
Incorrect installation
Check the connections between the finisher and the machine.
Install a new finisher.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
The machine does not detect that the front jogger HP sensor is
OFF for 40 ms after the front jogger fence moved.
The machine does not detect that the front jogger fence HP sensor
is ON for 830 ms after the front jogger fence returned to its home
position.
Defective front jogger motor
Disconnected connector
Overload to front jogger motor
Defective front jogger fence HP sensor
Turn the main power switch off and on.
Check the connectors to the front jogger motor and front jogger
fence HP sensor.
Check for problems in the jogger fence mechanism.
Replace the front jogger motor.
Replace the front jogger fence HP sensor.
4-72 SM