Preparing The New Laser Optics Housing Unit; Before Removing The Old Laser Optics Housing Unit - Ricoh B230 Service Manual

Preparing the new laser optics housing unit

1. Shutter [A] of the laser optics housing unit (
2. Polygon motor cover [B] of the laser optics housing unit (
3. Sponge padding [C]
4. Tag [D]
5. Reinstall the polygon motor cover [B].

Before removing the old laser optics housing unit

Do the following settings before removing the laser optics housing unit. These are
adjustments for skew adjustment motors in the laser optics housing unit.
1. Plug in and turn on the main power switch of the copier.
2. Enter the SP mode.
3. Execute SP9511-001 to clear the WTL positioning motor setting for Magenta.
4. Execute SP9511-002 to clear the WTL positioning motor setting for Cyan.
5. Execute SP9511-003 to clear the WTL positioning motor setting for Yellow.
6. Exit the SP mode.
B230/B237
x 3)
3-30
x 4)
SM